The AWFT012 is an economic, efficient and reliable impurity filter. It can be widely used for water from public water supply systems, underground wells, factories, mining companies, etc. The filter can initially remove sand, rust flakes, scale, particles, slime and suspended solids, and effectively reduce contamination such as rust, turbidity, and bacteria proliferation in water pipes. Furthermore, it protects water utilizing household appliances such as washing machines, water kettles, dish washers, coffee machines as well as in-floor heating and central air conditioning systems.

The cleaning process of the FT012 consists of two stages: flushing of the filter cartridge and high-speed discharge. This method allows for efficient and thorough cleaning of both the filter cartridge and filter body. Raw water entering the FT012 flows from the outside to the inside of the filter cartridge. By turning the top green knob clockwise, the cleaning process is started and both the flushing system and high-speed discharge valve are activated.
The FT012’s head is made of brass, and thus withstands mechanical stress and tension while preventing damage to the plastic head during installation. The pressure-resistant filter body is made of high strength polyamide. The food-grade stainless steel filter cartridge effectively withstands mechanical shocks and prevents deformation. The FT012’s cleaning brushes are equipped with silver inserts, which actively prevent bacteria proliferation. (The FT016 is equipped with two pressure gauges to monitor pressure drop through the filter cartridge, to easily determine the degree of clogging).

Siphon discharge valve
Siphon discharge valve
Brushes with silver inserts
Brushes with silver inserts
Wiper-type self-cleaning filter bowl
Wiper-type self-cleaning filter bowl
Fine processed male thread
Fine processed male thread

  1. Small in size, easy to install
  2. Complete brass shell
  3. Stainless steel filter cartridge (alloy 304)
  4. Pressure gauge can be added
  5. Manufactured in Italy
Unit Connection(Inch) Flow rate(m3/h) Pressure gauge Pressure
Filtration rating
Inlet temperature
Filter cartridge Height*Width*Depth
FT012 1 6 NA 1.5-16 89 5-30 stainless steel 312*100*90
FT016 1.5 12 Yes 1.5-16 89 5-30 stainless steel 364*251*120
  1. Required inlet temperature: 5-30°, indoor use only.
  2. Required inlet pressure:1.5-16Bar, pressurized valve or pressure reducing valve must be installed, if pressure limitations are exceeded or fall short.
  3. Allow for a five-hole socket and floor drain at place of installation (Power supply reserved for fully-automatic unit)